Hard reset Linksys EA6300

Linksys EA6300
Factory reset (Hard reset)

The route should be connected to the power and turned ON. Locate the red reset button on the back panel of the device. Press it down and hold for about 10 seconds – the power light will flash. Release the button and wait for 30-60 seconds for the router to reboot to its default settings.

Manual Download PDF
Firmware Link to support
Default username admin
Default password admin
Default IP address 192.168.1.1

Hard reset Linksys EA6700

Linksys EA6700
Factory reset (Hard reset)

Locate the reset button on the back panel of the router. Use a paperclip to press and hold the button for approximately ten seconds then release.

Firmware Link to support
Default username admin
Default password admin
Default IP address 192.168.1.1

Hard reset Linksys EA6500

Linksys EA6500
Factory reset (Hard reset)

Locate the reset button on the back panel of the router. Use a paperclip to press and hold the button for approximately ten seconds.

Firmware Link to support
Default username admin
Default password admin
Default IP address 192.168.1.1

Hard reset Linksys EA6400

Linksys EA6400
Factory reset (Hard reset)

Locate the reset button on the back panel of the router. Use a paperclip to press and hold the button for approximately ten seconds then release.

Firmware Link to support
Default username admin
Default password admin
Default IP address 192.168.1.1

Hard reset Linksys EA4500

Linksys EA4500
Factory reset (Hard reset)

Locate the reset button on the back panel of the router. Use a paperclip to press and hold the button for approximately ten seconds.

Manual Download PDF
Firmware Link to support
Default username admin
Default password admin
Default IP address 192.168.1.1

Hard reset Linksys EA3500

Linksys EA3500
Factory reset (Hard reset)

Locate the reset button on the bottom of the router. Use a paperclip to press and hold the button for approximately five seconds.

Manual Download PDF
Firmware Link to support
Default username admin
Default password admin
Default IP address 192.168.1.1

Hard reset Linksys EA2700

Linksys EA2700
Factory reset (Hard reset)

Locate the reset button on the bottom of the router. Use a paperclip to press and hold the button for approximately ten seconds then release.

Manual Download PDF
Firmware Link to support
Default username admin
Default password admin
Default IP address 192.168.1.1

Hard reset Linksys E4200

Linksys E4200
Factory reset (Hard reset)

Locate the reset button on the back of the router. Use a paperclip to press and hold the button for approximately ten seconds.

Manual Download PDF
Firmware Link to support
Default username [leave blank]
Default password admin
Default IP address 192.168.1.1

Hard reset Linksys E3200

Linksys E3200
Factory reset (Hard reset)

Locate the reset button on the bottom of the router. Use a paperclip to press and hold the button for approximately five seconds.

Firmware Link to support
Default username admin
Default password admin
Default IP address 192.168.1.1

Hard reset Linksys E2500

Linksys E2500
Factory reset (Hard reset)

Locate the reset button on the bottom of the router. Use a paperclip to press and hold the button for approximately ten seconds.

Manual Download PDF
Firmware Link to support
Default username [leave blank]
Default password admin
Default IP address 192.168.1.1